Gas Furnaces

Furnace service.

Gas Furnaces

When temperatures drop here in Port Orchard, WA and it is time to crank up the heat, will your gas furnace be ready?

Dana’s Heating & Cooling can be sure your home heating system delivers the comfort you deserve to keep your family warm and cozy every winter.

Our team of heating, ventilation, and air conditioning experts (HVAC) are certified by North American Technician Excellence (NATE), the US Environmental Protection Agency (EPA), and Performance Tested Comfort Systems (PTCS). Our electricians are licensed and compliant with Washington State.

When it comes to gas furnace installation and replacement, repair, and maintenance, you can count on our highly trained and knowledgeable professionals at Dana’s Heating & Cooling to provide a solution right for your comfort level and budget.

Gas Furnace Installation

With the proper professional routine maintenance, gas furnaces can last approximately 15 to 20 years. As they age, they become less efficient and more costly to run. If you notice that happening with your aging gas furnace, check with our heating and cooling team—it might be time to replace it.

We install a variety of gas furnace models and will work with you to find the best system to suit your home, lifestyle, and budget.

At Dana’s Heating & Cooling, we take the guesswork out of choosing a high-efficiency, quality gas furnace for your Washington home. We calculate your home’s square footage, along with the heating needs of each room, to determine the appropriate size of your needed furnace.

A correctly sized HVAC system will warm your home without wasting energy. A high-efficiency model will save money on utility bills. The higher the annual fuel utilization efficiency (AFUE) rating your furnace has, the more money you will save.

Dual-Fuel Systems

We can even add a heat pump to your heating system to maximize efficiency. Combining a gas furnace with an electric heat pump creates a dual-fuel heating system that can help you save on utility costs.

In a dual-fuel system, your heat pump serves as the primary heating source and your furnace kicks in when the temperature outside drops too low for the pump to operate efficiently. When the temperature rises again, the heat pump takes over once more.

Our HVAC experts can install an air handler to work in tandem with your heat pump. A heat pump captures warm air from outdoors and transfers it indoors where the air handler moves it throughout your home.

If you need financing for your new furnace or dual-fuel system, talk to one of our friendly team members. We offer options to accommodate everyone—you are family to us, and we never want to leave anyone out in the cold.

How Much Money Can a New Gas Furnace Save You?

Our AFUE energy savings calculator can help determine how much you could save on your utility bills. Simply enter your current unit’s AFUE value and compare it to a newer, more efficient system. You can even customize it to better match your home’s system for a more accurate calculation.

AFUE Energy Savings Calculator

{{ afueOld }}% vs {{ afueNew }}%


{{ annualNaturalGasSavingsPercent() }}%
Savings

OLD
{{ afueOld }}%
AFUE
${{ afueAnnualOperatingCostOldUnit() }}
Annual Cost
NEW
{{ afueNew }}%
AFUE
${{ afueAnnualOperatingCostNewUnit() }}
Annual Cost

Estimated 15-Year Savings:*
${{ projectedNaturalGasSavings }}


{{ year }} {{ state }} average residential natural gas retail price of ${{ rateResidentialNaturalGas }}/Mcf**.
*Based on an average annual rate increase of {{ avgUtilityIncrease }}%.

This calculator does not guarantee actual costs or savings and is only to be used for educational purposes.

Customize to Your Home

Adjust these settings for a more accurate calculation:

State

Province

Region

Rate ($/Mcf)

BTUs

Average Annual Heating Hours***


Historical Comparison

{{ state }}'s natural gas prices compared to {{ yearFifteenYearsAgo }}.

{{ yearFifteenYearsAgo }}

--

${{ priceFifteenYearsAgo }}/Mcf

{{ yearTenYearsAgo }}

{{ differenceTenYears }}

${{ priceTenYearsAgo }}/Mcf

{{ yearFiveYearsAgo }}

{{ differenceFiveYears }}

${{ priceFiveYearsAgo }}/Mcf

{{ year }}

{{ differenceCurrentYear }}

${{ rateResidentialNaturalGas }}/Mcf


** Data from U.S. Energy Information Administration
*** Data from 2002 EPA study

** Data for Canadian cities from nrcan.gc.ca
*** Data from weatherdatadepot.com

Gas Furnace Repair

How do you know your gas furnace is malfunctioning? It usually provides a few clues, such as an unusual sound or an odd odor. More obvious signs are blowing cool air or inconveniently stopping working altogether.

If you detect an issue with your HVAC equipment, do not let it ruin your day. Also, do not wait until the issue evolves into something more serious and costly. We always recommend calling us immediately for a prompt diagnosis and long-lasting repair.

Gas Furnace Maintenance

Preventative maintenance will keep your HVAC equipment running at peak performance and will extend its service life. With routine maintenance, our heating and cooling experts are able to detect potential issues before they develop into major malfunctions. Regular multipoint inspections, cleanings, and tune-ups are essential to help you save money overall. Professional maintenance also keeps you compliant with your manufacturer’s warranty.

Call our experienced team before the heating season starts for a full maintenance appointment. which typically includes a filter replacement. Ask about our preventative HVAC maintenance agreement plan—the Ultimate Savings Agreement (USA)—to keep your HVAC system running smoothly on those cold winter nights.

FAQs

How does a furnace work?
Furnaces are often the main heat source in a home. They work by heating air within a heat exchanger, and once the air reaches a certain temperature, a blower distributes the warm air throughout your ductwork to heat your home evenly.

What is an air handler?
An air handler is the indoor unit of an indoor/outdoor HVAC system. The device circulates warmed or cooled air produced by the outdoor unit—the heat pump or air conditioning unit. Since both indoor and outdoor units work in sync to heat or cool your home, both units must be in proper working order. When an air handler's fan is properly matched with the coil or heat exchanger, you will enjoy total comfort, maximum efficiency, and extended system life.

What is an energy-efficient furnace?
Did you know the higher the AFUE rating, the more efficient the furnace runs? Using less fuel is a smart choice for not only your wallet but the environment as well. When looking at a furnace with an AFUE rating of 95 percent, keep in mind you will quickly see a return on your investment through improved comfort, healthier indoor air quality, and lower energy bills. And you help out the environment.

How can I keep my furnace running efficiently?
Along with scheduling annual maintenance with our HVAC experts, always remember to change your air filter. Regularly changing the air filter helps capture particles in the air, allowing your system to operate more efficiently.

Dana’s Heating & Cooling Is Here for You

Our hard-working team at Dana’s Heating & Cooling is always here for you in Port Orchard, WA. When you need a replacement, installation, repair, or maintenance for your gas furnace, you can rely on us to be sure you are satisfied with the work we do. Your comfort and satisfaction are important to us. Call us at 360.226.7369 or request service online today to talk about what we can do for you.

Gas Furnace Maintenance in Bremerton, WA, 98311

“Outstanding work on both our furnace! Great personality!”
- Noel S.

Gas Furnace Repair in Port Orchard, WA, 98366

“Used Dana’s today to find where we have a gas leak. Very quickly found the valve in the furnace is not closing all the way. Parts department is closed till Monday but hopefully they can get a new valve in soon. Todays service was quick, efficient and informative. Aloha”

- Ken and Lynn P.

Gas Furnace Maintenance in Poulsbo, WA, 98370

“He did a good job and I appreciate prompt service. He was professional and knew his business and I liked the results”

- Donald W.

Gas Furnace Maintenance in Gig Harbor, WA, 98335

“Very knowledgeable, polite, and informative. Very impressed with the thorough inspection”

- Pete S.

Gas Furnace Maintenance in Bainbridge Island, WA, 98110

“I couldn’t ask for better service: thorough, on-time, happy to explain work needed, efficient… and pleasant!”

- Karen R.

Gas Furnace Maintenance in Silverdale, WA, 98383

“Nick J is on time, very professional. He really take time make sure everything is working properly. I am very happy with his service.”

- Carina R.

Gas Furnace Maintenance in Bremerton, WA, 98310

“Great technician – on time, friendly, informative, great all around experience.”

- Carolyn M.

Gas Furnace Maintenance in Port Orchard, WA, 98367

“Dana’s has done a great job for us , we use them every year, fast, efficient and take care of things the way you’d expect”

- Daniel & Julie L.

Gas Furnace Maintenance in Bainbridge Island, WA, 98110

“On time, polite, effective.”

- Pat I.

Gas Furnace Maintenance in Poulsbo, WA, 98370

“Our technician, Scooter, was punctual, professional, knowledgeable, and customer service oriented in his demeanor. Thank you Dana’s Heating for the continued reliable and professional service!”

- Doyle C.

Need Furnace Service?

Contact the experts at Dana's Heating.

Call us at 360.226.7369!